1. Start with how many seats you need

Most families land on 5 to 7 seats. A couple often does better with 2 to 4.
Read more
The single biggest decision in buying a hot tub is size - and it is also the easiest to get wrong, because it is tempting to plan around your biggest possible party instead of your everyday use. Count the people in your household who will actually use the spa regularly, then add the most guests you realistically expect to have soaking at once. For most families that lands between 5 and 7 seats. A couple, or a smaller patio or deck, often does better with a compact 2 to 4-seat spa - it heats faster, runs cheaper, and fits spaces a larger spa simply cannot.
Seat count on a spec sheet is a maximum, not a comfortable everyday number - a "7-seat" spa seats 7 adults shoulder to shoulder. If you want everyone to stretch out, size up from the headline number. Haven carries hot tubs from Artesian Spas, Nordic Hot Tubs and Platinum Spas across 2 to 9-seat layouts; your showroom team can match a layout to your actual household.
2. Jets are about where they hit, not how many

Where the jets hit matters more than how many.
Read more
Jet count gets quoted everywhere, but what matters more is placement: do the jets in the seat you will actually sit in target your lower back, shoulders, calves or feet? Models with a dedicated lounge seat (a seat you lie back in rather than sit upright in) usually place jets along the full length of the body - good for a full-body massage rather than a specific trouble spot. Some models add a moving back jet that travels along the spine instead of staying fixed in one place.
This is the single best reason to see one in person before buying (section 6) - a jet pattern that reads well on a spec sheet can feel completely different against your actual body.
3. Size the spa to your actual space

Measure the spot and the whole delivery path.
Read more
Measure twice: the footprint where the spa will sit, and the full delivery path to get it there (gates, stairs, fence openings, tight corners). A hot tub that fits the pad but cannot get through the side gate is a real, common problem. Bring your measurements - including the narrowest point along the delivery path - to your showroom visit so the team can confirm a specific model will fit before you order.
4. 120V plug-and-play vs. a dedicated 240V circuit

120V plugs in. 240V heats faster and needs an electrician.
Read more
This is the decision with the most real cost and timeline impact, and it deserves its own guide - see Electrical & Permits in Oregon and Washington for the full breakdown, including what a licensed electrician and your local permit office will expect. In short: a 120V plug-and-play spa runs on a standard dedicated outlet, which is simpler to install but heats more slowly. A 240V spa needs its own dedicated circuit from a licensed electrician, costs more upfront to install, and heats and recovers temperature faster - which matters more through a Pacific Northwest winter where the water is working harder against the outside air.
5. Insulation and the cover matter more than they look like they do

Good insulation and a tight cover cut running cost.
Read more
Insulation is what keeps your running cost down between soaks. Platinum Spas models, for example, use PlatinumShield Thermal Panel insulation with a thermo-wrap lining, and each brand Haven carries insulates its own way. Ask your showroom specifically how the model you're considering is insulated and what that means for your monthly running cost in a wet, cool Northwest climate.
The cover matters just as much: a tight-fitting, well-maintained cover is the single biggest factor in heat loss and in keeping rain and debris out of your water. Ask to see the actual cover in person at the showroom, not just a photo - thickness, foam density and the seal all vary by brand and model.
6. See it in person before you decide

Sit in it before you decide. Plan 20 to 30 minutes.
Read more
A hot tub is a purchase you will use with your body, not just look at - sit in it before you commit. Every Haven showroom has models on the floor so you can check the seat depth against your own height, see the jet layout, and compare a lounge seat to an upright seat side by side. Book a visit and plan 20 to 30 minutes to properly compare more than one model.
7. Water care: simple, once you have a routine

Test with strips 2 to 3 times a week.
Read more
Every hot tub needs its water sanitized, balanced and occasionally shocked - the chemistry itself is the same basic routine across brands, it's the schedule that takes getting used to. Most owners test with strips two to three times a week and bring a water sample into the showroom whenever something looks or feels off. See our hot tub care in Northwest rain and water care pages for the full routine and real product lines Haven carries.
8. Delivery and what happens on the day

Finish your electrical work before delivery day.
Read more
Delivery timing depends on the specific model, stock, and your site's access - ask your showroom for a current estimate once you've picked a model. Confirm your electrical work (section 4) is finished and inspected before your delivery date if you're installing a dedicated 240V circuit, since the crew generally cannot hook up a spa that isn't wired and ready.
9. Paying for it: cash, financing, or a deposit to hold

Financing is on approved credit. Applying commits you to nothing.
Read more
Haven Spa, Pool & Hearth offers financing through Wells Fargo on approved credit, with terms you apply for online in minutes or in person at any showroom - see how financing works for full terms and the real application link. Applying does not commit you to a purchase; it just shows you your options before you decide. If you're not ready to buy outright, ask about a deposit to hold a specific model while you finish planning your electrical work or save up.
Quick comparison: plug-and-play vs. dedicated circuit
| 120V plug-and-play | Dedicated 240V circuit | |
|---|---|---|
| Installation | Plugs into a dedicated outlet - simpler, often no electrician | Requires a licensed electrician and a permit in most areas |
| Heat-up speed | Slower - fine for mild climates or frequent use | Faster recovery - better suited to cold Northwest winters |
| Upfront cost | Lower installation cost | Higher upfront electrical cost, often better long-term fit |
| Good for | Renters, smaller spas, simpler sites | Year-round use, larger spas, cold-climate reliability |





